Interface Module Installation (Optional) - Samsung Big Duct Type Series Installation Manual

Interface module Installation (Optional)

Accessories (Interface module : MIM-B14)
External Control
1. Fix the case at with bolts on the side of the control box in the indoor unit.(See the
picture)
2. Attach the Interface module PCB to the case in the control box of the indoor unit,
then connect the power and the communication cable between the Interface
module and the indoor unit;
3. If you install a Interface module to an indoor unit, every outdoor unit which is
connected to an indoor unit can be controlled simultaneously.
4. Each indoor unit connected to the same centralized
Interface module.
Accessories (SPI module : MSD-EAN1)
SPI
Refer to the module(MSD-EAN1) installation manual for the more information.
DVM Big Duct_EU_IM_DB68-05047A-01_EN_16.03.30.indd 19
PCB Case Haness Wire(2P)
controller has its own
Haness Wire (4P) Screw
19
2016/4/7 15:54:26