Advertisement
8
forward
Drive battery
Hook-and-Loop Band
Use hook and loop tape
Drive battery
to secure the battery to
the battery tray.
Changing the battery
Sky Leaf Tip
position is a good way to
adjust the CG.
● Use a hook and loop band to mount the battery.
Receiver
！ The battery is heavy, so make
sure it is mounted securely.
● Trim the covering from the
exhaust hole.
● Styrene wall
Styrene wall
Exhaust hole
When adjusting the aircraft, disconnect the motor wiring
and to allow it to continue operation. When doing so,
please exercise extreme caution. Ensure that the aircraft is
secured and that it will not come into contact with anything
or anyone. Ensure that the motor will not rotate prior to
making any adjustments.
■ Unexpected high speed rotation of the motor may cause
Connect two 100mm extensions
to the aileron channels in the RX.
！ The exhaust hole is
located before the
Styrene wall.
The elevator and rudder
servo cables can be routed
through holes in the styrene
wall under the turtle deck.
serious injury.
15
Advertisement
