Installing Mea Software With A Windows 2000 Operating System; Figure 15. Mea Setup - Installer Setup Dialog Box - Motorola WMC6300 User Manual

Installing MEA Software with a Windows 2000 Operating
System
The following procedure outlines the installation of the MEA software on a typical Windows 2000
platform. Some of the steps may vary slightly based on the configuration of the individual
computers.
Complete the following procedure to install the MEA software:
1. Close and exit any existing MEA applications running on the computer prior to
installation.
2. Insert the MEA Software and Documentation CD into the CD-ROM drive.
3. If the installation program does not start automatically, open the Windows Start. Click on
Run then type the following into the dialog box:
d:setupmeaclient.exe
where d: specifies the CD-ROM drive and click the "OK" button.
4. The MEA Setup program will be displayed as shown in
5. Click the Next button to continue the installation process.
Figure 15.
6. The License Agreement dialog box will be displayed. Please review the End User
License Agreement. Use the scroll bar located at the right side of the dialog box to
display the complete text message.
MEA Setup - Installer Setup Dialog Box
12
Figure 15.