Table of Contents
Advertisement
TCP/IP Configuration
Configuring the TCP/IP Address for the network device:
1. After configuring the wireless network adapter properties, open the Control Panel and
open
Network and Dial-up
2. Find the Local Area Connection associated with the wireless network adapter. Right-
click that connection, and click Properties.
3. Select
Internet Protocol (TCP/IP)
4. Click the radio button
Subnet mask. Assigning an IP address and Subnet mask allows stations to operate in
access point mode
Default gateway and DNS server information is also required.
IP configuration information (DHCP to assign the IP address, gateway and DNS server
IP addresses) is usually obtained from the corporate IT staff.
Click
OK
to finish.
Connections.
and click Properties.
Use the following IP
(infrastructure mode) or in
address, then enter an IP address and
ad hoc mode
and to have Internet access.
Advertisement
Table of Contents
