Table of Contents
Advertisement
WEP Keys
To use the WEP keys:
1. Click the
Define WEP Keys
2. Click on Configure.
3.
Fill in the fields in the Define Pre-Shared Keys dialog box:
Key Entry
Determines the entry method for an encryption key: hexadecimal (0-9, A-
F), or ASCII text (all keyboard characters except spaces).
Encryption
Selects the default encryption keys used. Only allows the selection for a
Keys
shared First, Second, Third, or Fourth key whose corresponding field has
been completed.
WEP Keys (1-
Defines a set of shared encryption keys for network configuration security.
At least one Shared Key field must be populated to enable security using
4)
a shared key.
Click on the radio button to set the key as the default encryption key.
WEP Key
Defines the size for each encryption key. The options include:
Size
4.
Click
OK
for the changes to take effect.
radio button on the
64- bit (enter 10 digits for hexadecimal, 5 ASCII characters)
o
128- bit (enter 26 digits for hexadecimal, 13 digits for ASCII)
o
152-bit (enter 32 digits hexadecimal, 16 digits for ASCII)
o
Security
tab.
Advertisement
Table of Contents
