Using Peap-Mschap V2 Security - Samsung SWL-2460C User Manual

Using PEAP-MSCHAP V2 Security

To use PEAP-MSCHAP V2 security In the MagicLan Utility, access the
Profile Management window.
1. On the Security tab, choose the WPA radio button.
OR: On the Security tab, choose the 802.1x radio button.
2. Choose PEAP (EAP-MSCHAP V2) from the drop-down menu.
To use PEAP (EAP-MSCHAP V2)
server properties must already be set. Check with the IT manager.
1. Click the Configure
2. Select the appropriate certificate from the drop-down list.
3. Specify a user name for inner PEAP tunnel authentication:
Enter a PEAP user name in the User Name field to use a
o
separate user name and start the PEAP authentication process.
4. Click Advanced and:
Leave the server name field blank for the client to accept a
o
certificate from any server with a certificate signed by the
authority listed in the Network Certificate Authority drop-down
list. (recommended)
Enter the domain name of the server from which the client will
o
accept a certificate.
The login name used for PEAP tunnel authentication, fills in
o
automatically as PEAP-xxxxxxxxxxxx, where xxxxxxxxxxxx is
the computer's MAC address. Change the login name if
needed.
5. Click OK.
6. Enable the profile.
security, the server must have PEAP certificates, and the
button.
Security tab in the