Nokia Exx-1 series User Manual page 14

file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml
in uppercase and all the other letters are automatically
written in lowercase. indicates the number mode.
To write text with the keypad, press a number key 1–
9 repeatedly until the desired character appears. There
are more characters available for a number key than are
printed on the key. If the next letter is located on the
same key as the present one, wait until the cursor
appears, and enter the letter.
To insert a number, press and hold the number key.
To switch between the letter and number mode, press
and hold #.
To erase a character, press the clear key. Press and hold
the clear key to clear more than one character.
To access the most common punctuation marks, press
the 1 key. Press 1 repeatedly to reach the desired
punctuation mark.
To add special characters, press *. Scroll to the desired
character and press the scroll key.
To insert a space, press 0. To move the cursor to the next
line, press 0 three times.
To switch between the different character cases, press
#.
To select text, press and hold # and scroll right or left.
Predictive text input
1. To activate predictive text input, press # twice
quickly. This activates predictive text input for all
editors in the device. The indicator
14
on the display.
2. To write the desired word, press 2–9. Press each key
only once for one letter.
3. When you have finished writing the word and it is
correct, scroll right to confirm it, or press 0 to add a
space.
If the word is not correct, press * repeatedly to view
the matching words the dictionary has found.
If the ? character is shown after the word, the word
you intended to write is not in the dictionary. To add
a word to the dictionary, select Spell, enter the word
(up to 32 letters) using traditional text input, and
select OK. The word is added to the dictionary. When
the dictionary is full, the new word replaces the
oldest added word.
Write the first half of a compound word; to confirm it,
scroll right. Write the last part of the compound word.
To complete the compound word, press 0 to add a
space.
To switch predictive text input off for all editors in the
device, press # twice quickly.
Change the writing language
When you are writing text, you can change the writing
language. For example, if you press the 6 key repeatedly
to reach a specific character, changing the writing
language gives you access to characters in a different
order.
If you are writing text using a non-Latin alphabet and
want to write Latin characters, for example e-mail or
is shown
web addresses, you may need to change the writing
language. To change the writing language, select
Page 14 Page 14 Jan 8, 2007 1:39:30 PM Jan 8, 2007 1:39:30 PM