Table of Contents
Advertisement
Basic Operation
1. Power ON and OFF
Power ON
Press and hold
● The displaying China Unicom and user-set graphic. And then, the initial screen is displayed.
Power OFF
Press and hold
● The graphic disappears and the power is turned off.
● A graphic can be downloaded from UNI and changed in 'MainLCD Graphic or SubLCD Graphic'Display Graphic may be
displayed late depending upon the capacity of the downloaded graphic.
2. Placing a Call
Enter a desired area code and phone number ▶
● The phone automatically redials if the call is not connected. If you press an incorrect number, you can
correct the number with
.
● If the phone is locked, you should enter the password to make a call.
● Call Time is automatically displayed on the LCD. The call charge is calculated from the time the called
party receives your call.
28
Placing a call from Phone Book
Use search to select a desired person to call. (see P.115~117 Searching Phone Number)
Select a person to call ▶Select an item to call ▶
● Pressing
to 'Main Number'among the items with phone numbers stored.
● Press
'G r o u p 'or 'T u r b o 'in the Phonebook.
Turbo Dial i n g
If a number is registered in 'Turbo Dial' , press and hold 'Turbo Dial'on the main screen to make a call to the number.
(location number is 17, Press the dial button
and press and hold
Electronic Dialing
You can use this function conveniently by entering a few numbers in advance according to the audio announcement when using
ARS(for telebanking service or voice message confirmation). To cancel electronic dial, press
Input key
The numbers after 'P' can be sent only if the
P
T
The numbers after 'T' are sent shortly after
Enter Phone Number ▶ E n t e r 'P'or 'T' and then a number to be dialed electronically ▶
Basic Operation
with a person to call selected connects the call to the number set
on the idle mode. You can search phone numgers with 'N a m e ' ,
)
[ C A N C E L ] .
Operating Method
[TAP]
is pressed.
29
Advertisement
Chapters
Table of Contents
