Table of Contents
Advertisement
•
Outgoing mail host
address or host name of the mail server that sends your
e-mails.
• Send message: Define how an e-mail is sent from your
phone. When you select Immediately, a connection to the
mailbox is started immediately after you have made this
selection. When you select During next conn..., an e-mail
is sent the next time you connect to your remote mailbox.
• User name: Enter your user name, given to you by your
mail service provider.
• Password: Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
•
Incoming mail server
or host name of the mail server that receives your e-mails.
•
Mailbox
type: Define the e-mail protocol your mail service
provider recommends.
Note: This setting can be selected only once and cannot be
changed if you have saved or exited from the mailbox
settings.
• Security (ports): Select
Any amount of data and messages can be sent securely.
• APOP secure login: Select On to authenticate users on
login to the POP3 server.
User settings
•
Retrieve (POP3)/E-mails to retrieve
the number of e-mail headers you want to retrieve to your
phone.
•
Retrieve attachments
e-mails with or without attachments.
• Subscribed folders (for IMAP4): select the message folder
from which you want the phone to retrieve e-mails.
(Must be defined): Enter the IP
(Must be defined): The IP address
On (143/110) or On
(for IMAP4): Select Yes to retrieve
Message services
(993/995).
(for IMAP4): Limit
96
Advertisement
Table of Contents
