Table of Contents
Advertisement
Speed dialling a phone number
Once you have stored a number in Contacts, you can
assign the most frequently-used numbers to the speed
dialling keys
them with only one keypress. See "Assigning speed dialling
keys" on page 49.
Dialling using a pause
When you call an automated system, like a banking service,
you are required to enter a password or an account
number. Instead of manually entering the numbers each
time, you can enter the necessary DTMF tones separated by
pauses before dialling.
Note: DTMF tones are the tones you hear when you press the
number keys. DTMF tones allow you to communicate with
computerised telephone systems, for example, voicemail
servers or telebanking systems.
1. Enter the phone number you want to dial, such as a bank's
teleservice number.
2. Press
repeatedly to insert a pause.
You can insert two types of pauses:
• p: inserts a pause of approximately two seconds between
numbers. The numbers following "p" are sent
automatically.
• w: if you use a pause of this type, the remaining
sequence is not sent until you press
3. Enter a number to be sent after the pause, such as your
account number, PIN, etc.
to
and then quickly and easily dial
Call functions
.
38
Advertisement
Table of Contents
