Security - Pantech PG-C120 User Manual

locked screen, you can only use the Soft2 [Unlock] key to turn on the
LCD backlight.

9.5 Security

Set 'Menu>9.Settings>5.Security'.
The security settings enable you to restrict the use of your phone to other
people and types of calls of your choice.
Various codes and passwords are used to protect these features of your
phone. They are described in the following sections. See also 'Access
Code'.
The Security feature keeps your phone and SIM Card safe from
unauthorised users. You may set up a password for your phone or use
the Call Barring service and Fixed Dialing mode.
9.5.1 PIN1 Check
Press the navigation [ / ] key and [
If you fail to input the correct PIN number 3 times(Trial time depends on
the SIM) continuously, you will be prompted to input the PUK number.
- Enabled: You should input PIN whenever power on.
- Disabled: You don't have to input PIN whenever power on.
9.5.2 Change PIN1
] key for setup.
Changes the PIN number.
You can change the PIN number only when the phone is set for PIN
Enable.
9.5.3 Phone Lock
Once selected, this option locks your phone until you input the right
password to unlock. Press the [
9.5.4 Change Password
Changes a password. Default Password is 1234.
9.5.5 Phone Barring
This function offers multiple methods to limit incoming or outgoing calls.
In general, the barring service becomes activated by interoperating with
the network, but Phone barring is made by the phone itself. Major
functions are as follows:
- Incoming: Limits all incoming calls.
Outgoing: Limits all Outgoing calls. When you attempt to make
-
a call to the number that has the prefixed number previously
registered by you, the call will be barred.
9.5.6 Fixed Dialing (Fixed Dialing Numbers)
Fixed Dialing is a service that limits your access to specific numbers in
the Address Book list recorded on the SIM. Input PIN2 to set up or
cancel this service. (up to 3 times)
] key after you input the password.
69