Switching The Microphone Off (Mute); Holding A Call; Answering A Second Call - Pantech PG-C120 User Manual

Table of Contents

Advertisement

4.1 Switching the Microphone Off (Mute)

You can temporarily switch your phone's microphone off so that the
person you are talking to on the phone cannot hear you.
For example, you may wish to say something to another person in the
room but do not want the person calling to hear you.
Select 'Mute' followed by Options to activate the Mute function.
To get the microphone back on, select 'Unmute' followed by Options.

4.2 Holding a Call

You can place a current call on hold whenever you want. You can make
another call while you have a call in progress if your network service
provider supports this service. Of these two calls, one is active and the
other is on hold and you can switch between the calls.
To place a call on hold simply select 'Hold' followed by Options, or press
the [
] key.
You can reactivate the call whenever you want by selecting 'Resume'
followed by Options. Also, you can reactivate the call by pressing the
[
] key again.
Once a call is held, the name and icon of the caller will fade to grey.
To make a call while you have a call in progress:
24
① Enter the phone number that you want to dial or look it up in
Address Book entry.
② Press the key to dial the second call. The first call is automatically
put on hold.
To switch between two calls, select [Swap] from the Options menu.
The current call is placed on hold and the call on hold is reactivated so
that you can continue your conversation with the other person.
If you want to finish, complete each call normally by pressing the [
key.

4.3 Answering a Second Call

You can answer an incoming call while you have a call in progress, if
your network service provider supports this service and you have
activated the [Call
Waiting]
Applications Menu 9.3) You will be notified of an incoming call by a call
waiting tone.
To answer a call while you have another call in progress:
① Press the [
] key to answer the incoming call.
② The first call is automatically put on hold.
③ To switch between two calls, select [Swap] from the Options menu.
option. (For further details, see
]

Advertisement

Table of Contents
loading

Table of Contents