Consumer Information - AT&T ID-2820 User Manual

CONSUMER INFORMATION

a. This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
b. An applicable certification jack Universal Service Order Codes (USOC) for the equipment
is provided (i.e., RJ11C) in the packaging with each piece of approved terminal
equipment. The mounting of the approval unit in the final assembly must be made so
that the approved unit is isolated from exposure to any hazardous voltages within the
assembly. Adequate separation and restraint of cable and cords have provided.
c. A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
d. The REN (Ring Equivalence Number) is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a telephone line may result
in the devices not ringing in response to an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact AT&T Customer
Service. [For products approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX. The digits represented
by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.]
e. If this equipment ID-2820 causes harm to the telephone network, the telephone company
shall make reasonable efforts to notify you in advance that temporary discontinuance of
service may be required. However, if advance notice is not practical, the telephone
company will notify the customer as soon as possible. In addition, you will be advised of
your right to file a complaint with the FCC if you believe it is necessary.
f. The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens, the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
g. Should you experience trouble with this equipment, please contact the AT&T Customer
Service Center at 800-667-2118 for repair or warranty information. If the equipment is
causing harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
h. Please follow instructions for repairing if any (e.g. battery replacement section);
otherwise do not alternate or repair any parts of device except specified.
i. Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
j. NOTICE If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this Digital Cordless Telephone does not disable your
alarm equipment. If you have questions about what will disable alarm equipment,
consult AT&T Customer Service or a qualified alarm company.
Privacy of communications may not be ensured when using the phone."
k.
NOTICE According to telephone company reports, AC electrical surges, typically resulting
29