Table of Contents
Advertisement
BASIC NETWORK
3.
Subnet Mask: Select the subnet mask for the DHCP server. The subnet mask defines how many clients are
allowed in one network or subnet. The default subnet mask is 255.255.255.0/24. This means that a
maximum of 254 IP addresses are allowed in the subnet. However, one of them is occupied by the LAN IP
of the gateway.
4.
IP Pool Starting/Ending Address: Specify the starting/ending address of the IP address pool. When there
is a request, the DHCP server will automatically allocate an unused IP address from the IP address pool to
the requesting computer.
Note:
The number of IP addresses in this IP pool must be less than the maximum number of subnet
networks according to the set subnet mask.
5.
Lease Time: DHCP lease time to the DHCP client.
6.
Domain Name: This information is passed to the clients. This is optional.
7.
Primary DNS/Secondary DNS: Assign DNS Servers. This is optional.
8.
Primary WINS/Secondary WINS: Assign WINS Servers. This is optional.
9.
Gateway: This is the alternate Gateway IP address. Assign another gateway to your computer when the
DHCP server offers an IP address. For example, the gateway will assign an IP address to local computers
but they will access the Internet through another gateway. This is optional.
10.
Server: Check Enable if you want the DHCP server active.
System Management (DeviceHQ)
Sign up with DeviceHQ and Setup MTE to communicate with Device HQ
1.
Register and sign up a new account at https://www.devicehq.com.
2.
Login to
https://www.devicehq.com
a.
Select Account info (to the right of the account email address) and click Edit.
b.
Check Device API Enabled and click Update Account.
c.
Click on Generate new Device API Keys.
d.
Write down and save "Device API Secret" and "Device API Auth Token", these two keys are required
during MTE device setup.
Note:
MTE UI Setup for DeviceHQ
MTE must be running firmware version 2.04 or above in order to have DeviceHQ support. Download firmware from
the website and upgrade the device before proceeding.
1.
In Basic Network, on the LAN Setup Screen: Enter and Define Site Name so it shows as Description in
DeviceHQ
2.
In Basic Network, on the System Management Setup Screen: DeviceHQ access setup requires:
a.
Check the Enable option.
b.
Enter DeviceHQ account API secret and API Auth Token.
c.
Click Save.
Setup New Firmware File on DeviceHq
This is performed after logging in to DeviceHQ.
1.
Click on the Files tab and click the New Firmware button.
2.
Select model = Unspecified
14
DO NOT lose these keys since there is no way to see them again.
and generate a device API key using the following steps:
https://www.multitech.com/models/92506980LF
®
MultiConnect
eCell User Guide
Advertisement
Table of Contents
