Configuring Wireless Network Settings; Wireless > Network - Motorola RSG2500 User Manual

Section 3

Configuring Wireless Network Settings

The Wireless configuration windows are:
NETWORK
SECURITY
ADVANCED
Wireless > NETWORK
Field or Button
Wireless
Enable
Wireless
Interface
ESSID
Channel
Operating
Mode
3-10
Description
Turns the wireless interface on or off. The default is enabled. If you
disable the wireless interface, the RSG2500 wired network continues
to operate.
Sets the extended service set identifier (ESSID); the network name
used by all devices on your wireless network. It can be up to 32
alphanumeric characters. The ESSID must be entered on every
device on your wireless network to enable communication with the
RSG2500.
The default RSG2500 ESSID is Motorola. We recommend changing
the ESSID to a unique name that is easy for you to remember. Do not
change this or any other setting over a wireless connection.
Sets the channel on which the RSG2500 communicates. The default
is channel 6. Each wireless client must use this channel. If changed
wirelessly, once you restart the RSG2500, you will lose your wireless
connection. Do not change this or any other setting over a wireless
connection.
Sets the transmission protocol for the wireless network:
b only: 802.11b only
g only: 802.11g only
g and b: 802.11b/g mixed mode; the default
Configuration Utility Reference
RSG2500