Table of Contents
Advertisement
Section 3
Field
WPA/WPA2
Configuration
Group Rekey
Interval
Authentication
Type
Radius Server
IP Address
Radius Port
Radius Key
PSK
Passphrase
3-14
Description
All of the following settings apply to WPA, WPA2-Only, or
WPA2/WPA Mixed Security Mode:
Sets the time, in minutes, until the RSG2500 sends a new group key.
The default is 60 minutes.
Sets the authentication and key management type:
Remote
IEEE 802.1X is used for authentication and key
(Radius)
management. A remote RADIUS authentication
server is required to verify users.
The Pre-Shared Key (PSK) method is used for
Local (Pre-
Shared Key)
authentication and key management. No remote
authentication servers are required. This is
recommended for home users not using a remote
RADIUS server.
If the Authentication Type is Remote (Radius), enter the RADIUS
server IP address in this field.
If the Authentication Type is Remote (Radius), enter the RADIUS
server port number in this field. The default is 1812.
If the Authentication Type is Remote (Radius), enter the Radius
shared secret. It must be from 1 to 64 characters.
If the Authentication Type is Local (Pre-Shared Key), enter the key
encryption passphrase. It must be from 8 to 63 characters. Record it
to enter on your wireless LAN clients, if supported.
Configuration Utility Reference
RSG2500
Advertisement
Table of Contents
