Wireless Network Setup - Motorola SURFboard SVG2500 Quick Installation Manual

D. Wireless Network Setup
Computers or other devices using a wireless connection require
an IEEE 802.11g or 802.11b wireless adapter connected to the
USB, PCI, or PCMCIA port.
To provide an initial wireless connection to your network and
the Internet:
1. Connect the SVG2500 to the cable TV system as described
in Section A.
2. On each wireless client computer, install the wireless
adapter hardware and driver software according to the
manufacturer's instructions.
3. On each wireless client, set up a wireless adapter profile to
connect to the SVG2500. The procedure depends on your
wireless adapter and computer operating system. Follow
the manufacturer's instructions.
4. In your initial profile, use the SVG2500 default wireless
Network Name (SSID) Motorola (case-sensitive).
5. Continue with Section E to secure your Internet
connection.
QUICK INSTALLATION GUIDE 19