Table of Contents
Advertisement
Installation
Configuring Your Computers to Communicate with the RSG2500
To enable each computer on your network to communicate with the RSG2500, you may
need to configure it to automatically obtain an IP address. This section describes how to
configure computers running:
®
Windows
98 SE
®
Windows ME
®
Windows
2000
™
Windows XP
Configuring Windows 98SE and ME
1 Click Start.
2 Select Settings > Control Panel.
3 Double-click Network to display the Network window:
4
On the Configuration tab, select the TCP/IP line for the Ethernet adapter installed in
your PC. There may be multiple TCP/IP components listed. Choose only the one that is
configured for your adapter. In the example above, a 3Com Ethernet adapter card is
installed and is the correct choice.
RSG2500
Section 2
2-5
Advertisement
Table of Contents
