Section Appendix B -Declaration Of Conformity Information - Omron MC3 Series Installation And Operating Manual

A p p e n d i x B —
A
PPENDIX
OMRON SCIENTIFIC TECHNOLOGIES INCORPORATED
OMRON Scientific Technologies Incorporated (at 6550 Dumbarton Circle, Fremont, CA 94555-3605, U.S.A.), hereby declares that the
following series manufactured products listed below conform with the relevant Essential Health and Safety Requirements (EHSRs) of the
European Machinery Directive (2006/42/EC), the relevant requirements of the Low Voltage Directive (2006/95/EC),
with the essential protection requirements of the Electromagnetic Compatibility (EMC) Directive (2004/108/EC), and with the RoHS
Directive (2002/95/EC) - the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Universal Safety Mat Systems UM, UMM, UMQ & UMMQ Series with Safety Mat Controller MC3,
(Pressure-sensitive protective device – consisting of pressure-sensitive mats and controllers. Not suitable for
the detection of children)
The Universal Safety Mat UM Series with MC Series Safety Mat Controllers products have been type-examined per
issued by notified body TUV Rheinland Industie Service GmbH, Certification Body for Machinery (NB No. 0035).
The following transposed harmonized European and IEC Standards were used to form the basis for the requirements and tests:
EN 1760-1:1997: + A1:2009 - Safety of Machinery – Pressure-sensitive protective devices
Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors.
EN 62061:2005 – Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems.
EN ISO 13849-1:2008 – Safety of machinery. Safety-related parts of control systems. General principles for design
IEC 61508, parts 1 – 7:1998 – 2000 - Functional Safety Of Electrical/Electronic/Programmable electronic Safety-Related Systems.
IEC 50178:1997 - Electronic equipment for use in power installations
EN 60204-1:2006: Safety of machinery – Electrical equipment of machines, Part 1: General requirements.
OMRON Europe B.V.
Wegalaam 67 - 69
2132 JD Hoofddorp
Netherlands
Tel: +31 (0)23 568 13 00
Tel: +31 (0)23 568 13 88
OMRON SCIENTIFIC TECHNOLOGIES INC.
Fremont CA USA
Tel: 1/888/510-4357 in USA and Canada
D
ECLARATION OF
B — D
ECLARATION OF
I
NFORMATION
EC Declaration of Conformity
EC Type Examination Certificate,
Registration No: 01/205/0676/09
21
C I
OMFORMITY NFORMATION
C
OMFORMITY
©OSTI 0411 PN99307-0010 Rev. D
Original Instructions