Supported Vs. Generic Transmitters - Fluke 754 User Manual

754
Users Guide

Supported vs. Generic Transmitters

The Product communicates with most HART transmitters. "Supported Transmitters" are transmitters in which the Product is
programmed to use their device-dependent commands and software version. "Generic transmitters" are transmitters that are
not programmed in the Product. Table 1 shows the operations that are available for supported vs. generic transmitters in
single-point and multidrop configurations.
Menu
Top Level Active Device screen
Basic (read/write, cloning capability)
Sensor
(Temperature) Sensor (read/write)
Setup
Device Identification (read/write)
HART Output (read/write)
HART Information (read only)
Loop Test
Pressure Zero Trim
Service
Output Trim
Sensor Trim
Process Detailed process information
6
Table 1. Supported vs. Generic Transmitters (Devices)
Operation
Supported Transmitter
Single Point Multidrop
• •
• •
• •
• •
• •
• •
• •
•
Not Available
• •
•
Not Available
• •
• •
Generic Transmitter
Single Point Multidrop
• •
• •
Read only Read only
• •
• •
• •
•
Not Available
• •
•
Not Available
Not Available Not Available
• •