Setting The Ringer Level; Changing The Language - BellSouth MH9915 Installation And Operating Instructions Manual

Caller ID System Operation
TELEPHONE Function
KEYPAD
0 MSG Waiting Delete: Clears current message waiting indication.
0 0
oper
* Area Code: This unit does not require any programming of an Area
*
Code. However, this option could be used to add the local Area Code
to numbers that were stored as 7-digits in the phone book and 10-
digit dialing is required in the local calling area.
NOTE: At any time during options programming you can quit and the settings
that you have changed will be saved. Press the
the options menu or let the options programming time out by not pressing
any TELEPHONE KEYPAD buttons for 20 seconds.
A. Setting the Ringer Level
1. Press and hold the
2. Press the
flash/edit
3. Press the SCROLL UP
OFF.
4. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
5. Continue with programming or press the
STANDBY mode.
B. Changing the Language
1. Press and hold the
2. Press the button to go to the LANGUAGE programming option.
2
abc
3. Press the
flash/edit
flashing.
4. Press the SCROLL UP
ESPANOL, and FRANCAIS.
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
button to enter the menu.
voice mail/menu
button to change the setting. "HI" will begin flashing.
or DOWN button to toggle between HI, LOW, and
button to enter the menu.
voice mail/menu
button to change the setting. "ENGLISH" will begin
or DOWN button to toggle between ENGLISH,
21
button to quit
voice mail/menu
/re/pa button to
save
button to return to
voice mail/menu
/re/pa button to
save
button to return to
voice mail/menu