Table of Contents
Advertisement
Caller ID System Operation
E. Adjusting the Contrast
1. Press and hold the
2. Press the
button to go to the CONTRAST programming option.
5
jkl
3. Press the
flash/edit
4. Press the SCROLL UP
contrast.
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
F. Setting the PBX Number
1. Press and hold the
2. Press the
button to go to the PBX NUMBER programming option.
6
mno
3. Press the
flash/edit
4. Press the SCROLL UP
your PBX system. When not connected to a PBX, the phone will only function
normally when set to "OFF."
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
G. Changing the Flash Time
1. Press and hold the
2. Press the
button to go to the FLASH TIME programming option.
7
prs
3. Press the
flash/edit
4. Press the SCROLL UP
button to enter the menu.
voice mail/menu
button to change the setting. "4" will begin flashing.
or DOWN
button to toggle from 1 to 8 levels of
button to enter the menu.
voice mail/menu
button to change the setting. "OFF" will begin flashing.
or DOWN
button to customize the digit to match
button to enter the menu.
voice mail/menu
button to change the setting. "600" will begin flashing.
or DOWN
button to select the desired dialing delay.
23
/re/pa button to
save
button to return to
voice mail/menu
/re/pa button to
save
button to return to
voice mail/menu
Advertisement
Table of Contents
