Table of Contents
Advertisement
Caller ID System Operation
J. Deleting Message Waiting Indication
1. Press and hold the
2. Press the
button to go to the MESSAGE WAITING programming option.
0
oper
3. Press the
flash/edit
begin flashing.
4. Press the
/re/pa button to delete the indication. A long "beep" will sound
save
to confirm the setting has been saved.
5. Continue with programming or press the
STANDBY mode.
K. Setting the Area Code
1. Press and hold the
2. Press the
button to go to the AREA CODE programming option.
*
3. Press the
flash/edit
4. Press the TELEPHONE KEYPAD
code for your phone number.
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Press the
voice mail/menu
NOTE:
To use the call back function, press the
10-DIGIT DIALING mode. Press the
the stored 7-digit number plus the area code.
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
button to enter the menu.
voice mail/menu
button to reset the Message Waiting Indication. "DEL" will
button to enter the menu.
voice mail/menu
button to change the setting. "000" will begin flashing.
to
1
0
oper
button to return to STANDBY mode.
/option button and then select the
#
button and the unit will automatically dial
talk
IMPORTANT
25
/MENU button to return to
VOICE MAIL
voice mail/menu
buttons to enter the three digit area
/re/pa button to
save
Advertisement
Table of Contents
