Troubleshooting the Mower
PROBLEM
Mower will not raise.
Mower cut is uneven.
Mower cut is rough
looking.
Engine stalls easily with
mower engaged.
Excessive mower
vibration.
For all other issues, see authorized dealer.
30
LOOK FOR
Mower deck not properly
installed.
Mower not leveled properly.
Rider tires not inflated
equally or properly.
Engine speed too slow.
Ground speed too fast.
Engine speed too slow.
Ground speed too fast.
Cutting height set too low.
Discharge chute jamming
with cut grass.
Blade mounting hardware is
loose.
See Mower Deck Installation.
See Mower Adjustment.
See Maintenance section.
See engine speed control to FAST.
Decrease ground speed.
Set engine speed control to FAST.
Decrease ground speed.
Cut tall grass at maximum cutting.height during first pass.
Cut grass with discharge pointing toward previously cut area.
Tighten to 50-60 ft-lbs (68-81 Nm).
REMEDY