Wind Sensor; Rain Gauge; Outdoor Temperature / Humidity Sensor; Getting Started - Oregon Scientific WMR86NSX User Manual

1. Clock signal reception indicator
2. Timestamp is displayed
3. Time zone offset
4. Moon phase
5. Time / date / calendar

WIND SENSOR

1
2
3
1. Wind direction
2. Wind vane casing
3. Anemometer
4. Solar power socket

RAIN GAUGE

Base and funnel:
1. Rain gauge
2. Battery compartment
3. RESET button
1. Funnel
2. Indicator
WMR86NSX_IM_EN R10.indd 4
4
C
OUTDOOR TEMPERATURE / HUMIDITY
SENSOR
1
1. LCD display: Shows the channel number, temperature
and humidity readings.
2. TEST: Searches for weather station
3. °C / °F: Select temperature unit
4. CHANNEL switch
5. Battery compartment

GETTING STARTED

NOTE Install batteries in the remote sensors before the
base station matching the polarities (+ and -).
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.

SET UP REMOTE WIND SENSOR

The wind sensor takes wind speed and direction readings.
The sensor is battery operated. It is capable of
transmitting data to the base station wirelessly within an
approximate operating range of 100 meters (328 feet).
To insert batteries:
1
1. Unscrew the anemometer from the wind sensor carefully.
2. Insert batteries matching the polarities (+ / -) and
replace the anemometer. Press RESET after each
battery change.
SET UP REMOTE TEMPERATURE / HUMIDITY
SENSOR
The remote sensor can collect data from up to 3 channels.
To set up the remote sensor:
1. Slide open the battery door.
2. Slide channel switch to select a channel (1, 2, 3).
Ensure you use a different channel for each sensor.
3. Insert the batteries, matching the polarities (+ / -).
4. Press TEST after each battery change.
5. Close the battery door.
RESET: Reinstall batteries and then press TEST.
4
2
3
4
5
2
2018/9/20 上午11:52