ResMed H5i User Manual page 9

Technical specifications
Maximum heater plate temperature
Temperature cut-out
Maximum gas temperature
Nominal dimensions (L x W x H)
Weight (Standard water tub)
Weight (Cleanable water tub)
Water capacity
Docking station
Cleanable water tub
Standard water tub
Operating temperature
Operating humidity
Storage and transport temperature
Storage and transport humidity
ClimateLine air tubing
MAX
ClimateLine air tubing
Heated tubing temperature cut-out
IEC 60601-1 classification
Electromagnetic compatibility
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
• The temperature and relative humidity settings displayed for ClimateLine or ClimateLine
measured values.
•
Check with your service provider before using the SlimLine air tubing with devices other than the S9
or H5i.
65°C
74°C
41°C
Docking station and water tub: 153 mm x 145 mm x 86 mm
Docking station and unfilled water tub 0.69 kg
Docking station and unfilled water tub 0.79 kg
To maximum fill line 380 mL
Flame retardant engineering thermoplastic, aluminium
Injection molded plastic, stainless steel and silicone seal
Injection molded plastic, aluminium and thermoplastic
elastomer
+5ºC to +35ºC
10–95% non-condensing
-20ºC to +60ºC
10–95% non-condensing
Flexible plastic and electrical components, 2 m, 15 mm
inner diameter
Flexible plastic and electrical components, 1.9 m, 19 mm
inner diameter
41°C
Class II (double insulation), Type BF
Please refer to the S9 VPAP Tx Clinical Guide for details
MAX
are not
7
English