Attaching The Cable Guides - Cisco ASR-920-20SZ-M Hardware Installation Manual

Install the Router
Figure 15: Set up Device on Rack
Step 2
Use a tape measure and level to verify that the device is installed straight and on level.

Attaching the Cable Guides

Note If the chassis is mounted using 19-inch brackets, you must assemble the cable guides before installing the
chassis on the rack.
Procedure
Step 1
Position the cable A920-CBL-GUIDE (left and right) against the front of the chassis and align the two screw
holes, as shown in the figure.
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
Attaching the Cable Guides
33