Status Indication; Shc1 Battery Replacement - Honeywell Searchpoint Optima Plus Operating Instructions Manual

MAN0905_Issue 7_07/17
8. Use of the SHC1 Handheld Interrogator
When the SHC1 is switched on, check that it displays Optima+ on the initial screen. If it shows Optima or
Excel, or reports "Comms Error 99", change the operating mode as follows: -
1. Select Change Mode.
2. Use the and keys to scroll through the options until Optima+ is highlighted.
3. Press Enter to select.
The SHC1 returns to the main menu.
Note: The instructions that follow in this manual assume that the SHC1 is switched on, in Optima+ mode, in
the Main Menu.

8.4 Status indication

When Display is selected, the screen includes a status character which indicates the Searchpoint Optima
Plus status (warning, fault etc.) as follows: -
/
A spinning line shows the system is operating normally i.e. in a fully active state
| A stationery line shows the system is in inhibit
W Active Warning
F Active Fault
A Alarm
Press Enter to view the software version of Searchpoint Optima Plus.

8.5 SHC1 Battery Replacement

To replace the battery in the SHC1 Handheld Interrogator proceed as follows:
Note: To comply with certification, only use DURACELL MN1604 Type 6LR61
1. Remove the Interrogator from its protective pouch.
2. Using a 2.5mm allen hexagonal key, loosen the four screws on the rear cover of the Interrogator.
3. Carefully lift the front half of the Interrogator away from the rear cover, ensuring the flexible connector
connecting the key pad to the electronics module is not damaged.
4. Unclip the old battery and fit the new battery in position. Re-use the protective sleeve.
5. Carefully replace the front half of the Interrogator back into the rear cover, ensuring the flexible
connector lies flat.
6. Using a 2.5mm allen hexagonal key, tighten the four screws on the rear cover of the Interrogator.
When the battery reaches end of life, take it to a collection point designated by local authorities.
Searchpoint Optima Plus with optional HART
38
output
®
Operating Instructions
2108M0550