EdgeStar DWP62BL Service Manual page 47

Step 5: Reinstall the soap dispenser

Slide the soap dispenser into place in the same orientation you removed it from

Tighten the six Philips head screws that secure the soap dispenser to the door
NOTE: It is easiest to start the top three screws to hold the soap drawer then line up the lower bracket
and install those screws. Once all of the screws are started, you can go back and tighten them

Reinstall the electrical connectors on the soap dispenser.
NOTE: Refer back to your photo taken earlier to put the connectors back in the right location
46