Universal Remote Control HomeSet R200 User Manual page 13

R200 Owner's Manual
The screen displays network information about your R200 and the
wireless network where it is connected. In this screen you're able
to scan for Wi-Fi network, select a network to connect to and
enter any custom settings required.
After connecting the HomeSet C200 Control Hub to the local
network, select the "Base Station" (see below) setup item which
results in display of the available C200 Hubs within the home. C200
Hubs (Base Stations) are identified by their MAC Address, which is
displayed on a sticker on the hub.
Selecting a C200 Hub results in the display of a screen that allows
the viewing and setting of custom Base Station network properties.