Universal Remote Control HomeSet R200 User Manual page 10

R200 Owner's Manual
Notice
To Get Started Installing
● Inserting the Lithium Polymer Battery
Press the spring lock down to unlock and remove the battery
cover. A battery is included in the box. Place the battery into the
battery compartment, making sure to align the contacts on the
battery to the contacts on the R200. The battery snaps into
place when aligned properly. Replace the cover.
● Using the Micro USB Charger
Plug the micro USB charger into a power outlet and into the
bottom of the R200 Remote. There is no harm in leaving the
R200 plugged in and charging when it is not in use.
● Communication via Wi-Fi
To use the R200 with any companion product that can
communicate in a two-way fashion, it must be configured to be
part of a Local Area Network (LAN) via a Wi-Fi b/g/n access
point or router.