Vertex Standard VX-450 SERIES Operating Manual page 23

(VHF) FCC ID:K6610943020, IC:511B-10943020 / (UHF) FCC ID:K6610944720, IC:511B-10944720
S
ELECTABLE
Press the assigned Programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined tone
table. You can operate using the indicated sub-au-
dible tone in the Selectable Tone mode.
D CH#1
IRECT
Press the assigned Programmable key to recall the
Dealer pre-programmed channel directly.
REC/PLAY V
This function allows your radio to record a received
voice message, and to play back the recorded audio.
It requires installation of the optional Voice Record-
ing Unit.
Recording;
Press the assigned Programmable key for 1.5 sec-
onds to enable the Voice Recording Mode. If the in-
coming signal is received, so as to un-mute the
squelch and pass audio, then the " " Icon will flash
and received audio will be recorded. When the voice
recording is completed, the " " stays on.
Playback;
Press the assigned Programmable key momentarily
to play back the last message.
VX-450 S
ERIES
A
T
ONE
#4
TO
S : O
OICE TORAGE PTION
O M
PERATING ANUAL
O
DVANCED PERATION
To stop the play-back, press the TOP SEL key.
While playback is proceeding, you may press the [ A ]
key (4-key version) or [ ] key (16-key version) to
jump to the previous message, or press the [ B ] key
(4-key version) or [ # ] key (16-key version) to jump
to the next message. Furthermore, press the [ D ] key
to clear the all messages and stop the play-back.
SQL
You can manually adjust the squelch level using this
function:
Press the assigned Programmable key. A tone will
sound, and the current squelch level will appear
on the display.
Press the SIDE-1/SIDE-2 button to select the de-
sired squelch level.
Two seconds after releasing the SIDE-1/SIDE-2
button, the display will revert to the normal chan-
nel indication.
AF M
IN
Press the assigned Programmable key to reduce the
audio output to the (lower) level programmed by your
Dealer.
V
R
Vertex Standard Co.,Ltd.
21