Step 2: Install I-Vu Ccn Device Managers; Step 3: Use Network Service Tool V To Ensure Hardware Is Communicating On The Ccn Network - Carrier i-Vu CCN Pro 4.2 Installation Manual

Before starting your i-Vu CCN Pro

Step 2: Install i-Vu CCN device managers

Refer to the i-Vu CCN Router or i-Vu Link Installation Guide for mounting and wiring instructions. Download
these from the Documentation CD.
You will need the instructions in that document for the following:
•
Mounting and wiring the router
•
Wiring the ports for communication and configuration
•
Setting up IP addressing
Step 3: Use Network Service Tool V to ensure hardware is
communicating on the CCN network
Connect the 3-terminal connector of the Network Service Tool's USB to CCN Converter to Port S1 on the i-
1
Vu device manager.
Carrier USB to CCN converter
(top CCN Port)
+
G
-
Launch Network Service Tool and connect to the i-Vu device manager. Each i-Vu device manager
2
defaults to Gateway functionality and has a CCN address of 0,1.
CAUTION! Every CCN device must have a unique CCN address on the CCN network! Do not use Bus 0,
Element 238, as it is automatically assigned to i-Vu CCN Pro.
Upload the i-Vu device manager.
3
Change the address of the i-Vu device manager using the Display/Set Properties function.
4
Access Service Configuration Table IP_CONF to enter the following configuration options.
5
NOTE A static IP address is required, as DHCP is not supported.
Host IP Address - enter the IP address for the device manager, as provided by the LAN
○
administrator. (allowable entries for xxx.xxx.xxx.xxx: xxx is a decimal number between 0 - 255)
Subnet Mask - enter the IP address for the device manager, as provided by the LAN administrator.
○
(allowable entries for xxx.xxx.xxx.xxx: xxx is a decimal number between 0 - 255)
Default Gateway - enter the IP address of the default gateway on the Ethernet LAN for the device
○
manager, as provided by the LAN administrator.
CCN ENET Configuration
Device Type
Select 0 if this device manager is the Gateway. (NOTE Only one gateway is permitted per system.)
○
Select 1 if this device manager is the Bridge.
○
4
i-Vu device manager
(Port S1)
Net+ (Pin 1)
Signal Ground (Pin 5)
Net- (Pin 2)
i-Vu CCN Pro 4.2