Advertisement
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 5
Important Note: High-speed hub drivers are included with most USB 2.0
4. Plug the USB-A connector of the USB device, or an additional hub,
into any of the downstream ports of the Hub.
Important Note: When moving a device from one port on the Hub to
INSTALLATION
PCI upgrade cards, and are pre-installed along with the
PCI card drivers. If you purchased an upgrade card prior
to the release of high-speed hub support, please check
with your PCI card vendor for an updated USB 2.0 driver.
The Belkin USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of
Adaptec. The most recent Belkin driver is available at
www.belkin.com.
another, it may be necessary to reinstall the USB drivers
for that device.
5
En
Advertisement
