Removing Batteries From Battery Tray - Invacare Bora XTR Service Manual

6.
Remove battery terminal caps from battery terminals
(1).
7.
Loosen battery terminal clamps (1).
8. Loosen screw on negative terminal (black cable).
9. Loosen screw on positive terminal (red cable).
10. Install parts in reverse order.
1528338-Q
Fig. 5-53
Fig. 5-54
11. Make sure that battery box sockets/plugs have been
correctly refitted. A polarity diagram is located in each
battery box shroud.
Front battery:
The battery box socket is located at the front (flange
central).
• Socket side A is on the left in the direction of
travel.
• Socket side B is on the right in the direction of
travel.
The battery box plug is located at the rear (flange
flush).
• Plug side A is on the left in the direction of travel.
• Plug side B is on the right in the direction of
travel.
Rear battery:
The battery box socket is located at the front (flange
central).
• Socket side A is on the left in the direction of
travel.
• Socket side B is on the right in the direction of
travel.
12. The battery needs to be inserted tightly into battery
box. Use foam sections supplied.
13. Test all functions.

5.11.3 Removing Batteries from Battery Tray

CAUTION!
Fire and burns hazard if battery terminal is
bypassed
– Take great care to ensure that the battery
terminals are never short-circuited with tools
or mechanical mobility device parts.
– Ensure that the battery terminal caps have
been replaced if you are not working on the
battery terminals.
Fig. 5-55
Fig. 5-56
Service
37