Configuring User Pages - Siemens SIMATIC S7-1500 Function Manual

3.8.2

Configuring user pages

Configuring user pages
Figure 3-23
Proceed as follows to configure the user pages in STEP 7:
● Select the CPU in the device configuration.
● Open the settings in the Inspector window of the CPU under "Properties > General > Web
● In the area "User pages" under
● Enter the name of the HTML page under
● You can also specify a name for your application under
● In the "Extended" area, enter the file extensions that have to be checked for AWP
● You can accept the number for the Web DB
● Click the button
Web server
Function Manual, 01/2013, A5E03484625-01
Configuring user pages in STEP 7
server".
device in which you have saved your HTML page.
start the application.
name is used to further divide or group the websites. If an application name already
exists, the URL is displayed in the following format: http://a.b.c.d/awp/<application
name>/<page name>.html
commands in input box
files with the extensions ".js", ".htm" and ".html". Here you can enter other file extensions
that you have used when creating your user page.
you can assign a new number of your choice that is not assigned.
④
"Create blocks" to create data blocks from the source files. The
created data blocks are stored in the STEP 7 project tree in the folder "System blocks >
Web server". These data blocks consist of a control data block (Web control DB) that
controls the display of the websites and one or several data block fragments (fragment
DBs) with the compiled websites.
①
"HTML directory", select the folder on your display
②
"Start HTML page" that is to open when you
⑥
"Files with dynamic contents". By default, STEP 7 analyses
⑦
③
"Application name". This
and the fragment DB start number
Websites
3.8 User pages
⑦
or
55