Get Started; Keys And Parts; Charge The Battery - Nokia LPS-6 User Manual

Wireless loopset
Table of Contents

Advertisement

Get started

Keys and parts

1
Neck loop
2
Vibrating alert motor
3
Multifunction key
4
Microphone
5
NFC area
6
USB connector
7
Charging status indicator
8
Volume keys
9
Power key
10
Bluetooth connection indicator

Charge the battery

1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector.
The charging status indicator shows the progress of the charging, turning from red to yellow and
finally to green when the battery is fully charged. Charging the battery fully may take up to 2 hours.
3. When the battery is fully charged, disconnect the charger from the loopset first, then from the wall
outlet.
The fully charged battery has power for up to 12 hours of talk time or up to 300 hours of standby
time.
Tip: To check the charging status when you're connected to a phone, press the power key. The
charging status indicator shows the battery level (red=low, yellow=good, green=full).
When the battery is close to discharged, the loopset vibrates and beeps about every 5 minutes, and
the charging status indicator quickly flashes red.
© 2013 Nokia. All rights reserved.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents