Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.
Call handling ... 16 Adjust the headset volume... 18 Mute or unmute the microphone... 18 Switch the call between headset and mobile device ... 18 Turn off indicator light ... 19 Clear settings or reset... 19 4. Battery information ... 21...
I n t r o d u c t i o n Introduction With the Nokia Bluetooth Headset BH-602 you can make and receive calls while on the move and use your mobile device hands free. You can use the headset with compatible devices that support Bluetooth wireless technology.
10 meters (33 feet). The closer the mobile device and the headset are to each other, the better is the performance. The optimal operating range is shown in dark grey in the picture. The connection is subject to interference from distance and obstructions (shown in light grey) or other electronic devices.
(2), charger connector (3), answer/end key (4), indicator light (5), earpiece (6), power key (7), and microphone (8). Before you can start using the headset, you must charge the battery and pair the headset with a compatible device.
Check the model number of any charger before using it with this headset. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers. Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous.
45 minutes with the AC-4 charger. 3. When the battery is fully charged, the indicator light turns green. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 11 hours of talk time or up to 300 hours of standby time.
■ Switch the headset on or off To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. When the headset tries to connect to a paired device, the indicator light slowly flashes green.
■ Pair the headset 1. Ensure that your mobile device is switched on. 2. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the indicator light flashes blue quickly.
See the user guide of your device for details. You only need to pair the headset with your device once. If pairing is successful, the headset appears in the menu of the mobile device where you can view the currently paired Bluetooth devices.
G e t s t a r t e d In your device, you may be able to allow the headset to connect to it automatically when the headset is switched on. To do this in Nokia devices, change your paired device settings in the Bluetooth menu. ■ Troubleshooting...
B a s i c u s e Basic use ■ Place the headset on the ear The headset is provided with an earloop that you can use for a better fit on your ear. Slide the earloop over your ear (1), and gently plug the earpiece into your ear.
B a s i c u s e To use the headset on the left ear, rotate the earloop so that the loop is to the left of the Nokia logo (3). ■ Call handling To make a call, use your mobile device in the normal way when the headset is connected to it.
When you receive a call, the indicator light flashes blue quickly, and you hear a ringing tone through the headset. To reject an incoming call, press the answer/end key twice, or use the keys of the mobile device.
■ Switch the call between headset and mobile device To switch the call from the headset to the connected mobile device, press and hold the power key for about 2 to 3 seconds (the headset switches off), or use the respective...
When the indicator light is off, it is not shown when the headset is connected to a device, when you handle calls, or when the microphone is muted. When you switch on the headset, the indicator light is enabled.
Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
Collection information is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative. For more information, see product Eco-Declaration or country-specific information at...