D-Link Dis-200G Series Web Ui Reference Manual page 83

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
The fields that can be configured are described below:
Parameter
Profile Name
Click the Apply button to associate the G.8032 profile with the ERP instance created.
Click the Delete button to disassociate the G.8032 profile based on the Profile Name entered.
Click the Edit button to modify the specified G.8032 profile.
After click the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Revertive
Guard Timer
Hold-Off Timer
WTR Timer
Click the Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
Figure 6-45 ERPS Profile window
Description
Enter the G.8032 profile's name here. This name can be up to 32
characters long. Multiple ERP instances can be associated with
the same G.8032 profile. The instances associated with the same
profile protect the same set of VLANs, or the VLANs protected by
one instance are a subset of LANs protected by another instance.
Figure 6-46
ERPS Profile (Edit) window
Description
Select the checkbox and then select the revertive state. Options to
choose from are Enable and Disabled. This function is used to
revert back to the working transport entity, for example, when the
RPL was blocked.
Select the checkbox and enter the guard timer value here. This
value must be between 10 and 2000 milliseconds. By default, this
value is 500 milliseconds.
Select the checkbox and enter hold-off timer value here. This value
must be between 0 and 10 seconds. By default, this value is 0
seconds
Select the checkbox and enter the WTR timer value here. This
value must be between 1 and 12 minutes. By default, this value is
5 minutes.
76