D-Link Dis-200G Series Web Ui Reference Manual page 73

Voice VLAN OUI
This window is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the voice
traffic. There are a number of pre-defined OUIs. The user can further define the user-defined OUIs if
needed. The user-defined OUI cannot be the same as the pre-defined OUI.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI, as show
below:
The fields that can be configured are described below:
Parameter
OUI Address
Mask
Description
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Voice VLAN Device
This window is used to show voice devices that are connected to the ports. The start time is the time
when the device is detected on this port, the activate time is the latest time saw the device sending the
traffic.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Device, as show
below:
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 6-33 Voice VLAN OUI window
Description
Enter the OUI MAC address.
Enter the OUI MAC address matching bitmask.
Enter the description for the user-defined OUI with a maximum of
32 characters.
Figure 6-34 Voice VLAN Device window
66