To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore
from HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Effective immediately (running-
config)
Take effect after the next boot
(startup-config)
Click the Restore button to initiate the configuration restore.
Configuration Restore from HTTP
This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Include Username Password
Exclude Username Password
Click the Backup button to initiate the configuration file backup.
Reset
This window is used to reset the Switch's configuration to the factory default settings.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 12-22
Configuration Restore from HTTP window
Description
Click the Browse button to navigate to the location of the
configuration file located on the local PC.
Specify this radio button to restore and overwrite the running
configuration file on the Switch.
Specify this radio button to restore and overwrite the start-up
configuration file on the Switch.
Figure 12-23
Configuration Backup to HTTP window
Description
Specify this radio button to back up the running configuration file
include username password from the Switch.
Specify this radio button to back up the running configuration file
exclude username password from the Switch.
132