Belkin F1U400 User Manual page 7

P74077-D_F1U400_man.qxd 11/13/02
Mac OS X or above
Before you begin, be sure that:
1. The Switch is not connected to your computer;
2. The Switch supports your operating system (see page 3 of the manual); and
3. Your USB devices are compatible with your connected computers.
To install the software:
1. Place the CD in the CD tray of your Mac computer.
2. Double-click on the CD-ROM disk located on your desktop.
3. Drag the icon with the file named "F1U400 Mac OS X files.sit" to
your desktop.
4. Double-click on the file named "F1U400 Mac OS X files.sit".
5. Double-click on the file named "F1U400.dmg".
6. Double-click on the file named "F1U400".
7. Double-click on the file named "F1U400.mpkg".
8. If administrative rights are required, click the lock icon to make changes.
4:14 PM Page 10
INSTALLATION
10
INSTALLATION
9. Type your user name and password, then click "OK".
10. Click on "Continue" to begin installation.
11. Select a destination volume to install the Switch software by double-clicking
on the listed icon.
12. Click on "Continue" to proceed with installation.
13. Click on "Install" to continue with installation.
11