Using The File Transfer Feature - Belkin F1U128-KIT User Manual

Bitronics dualbus switch kit

Hide thumbs Also See for F1U128-KIT:

Table of Contents

Enlarged version

Windows

95 / 98 and NT

Using the File Transfer Feature

The file transfer feature of the Bitronics switch allows both computers to

connect as if there were a file transfer cable connected between them. To

do this, double-click on the Bitronics switch system tray icon, click on File

Transfer, and click OK. The LED of the corresponding computer port on the

Bitronics switch will turn green. This LED represents the computer you are

on now is set for file transfer mode.

Next, the second PC must also perform the same operation. When both sets

of PC LEDs on the Bitronics switch are green, then the computers are ready

for file transfer. At this point, the cables and the Bitronics switch act as if it

were a file transfer cable. You can now run programs such as Windows

Direct Cable Connection, or LapLink

websites for information on how to configure their software. Just remember

that your Bitronics switch setup mimics the file transfer cable requirement.

NOTE:

Computer 1 can only file transfer to computer 2, and computer

3 can file transfer to computer 4. If you change the ports

manually using the buttons, the changes made will not be

reflected in the software.

(continued)

. Please refer to their user manuals or

Table of Contents

P73045