Loading A Configuration File - Belkin F1DN104K-3 Configuration Manual

5.
Loading Utility
Once the KM Switch is in programing mode and connected to the PC:
1. Open the KM Configuration Loader utility
2. Make sure KM Loader window shows "Device Connected" on lower left corner.
3. Select COM port "COM # (Belkin Registration Device)" (COM port # will differ from system to
system).
4. Select port configuration "4" for F1DN104K-3, "8" for F1DN108K-3.

Loading a Configuration file

1) Select Browse to load Configuration File in "Select configuration file" field
2) Locate your .kmc configuration file
3) Select "Process", If successful, KM Configuration Loader Tool Window will show
"Configuration file has been successfully loaded to device"'
4) Power cycle the device (for the F1DN108K-3, ensure you also remove the USB A to USB
A cable)
P a g e | 18 Secure KM Custom Monitor Configuration Guide LNKPG-00559 Rev. A00