Smeg A42-5 Instruction Manual page 5

Twin oven model
The appliance comes with a terminal board on the back for electrical
hook-up (see following diagram). To open the terminal board cover,
remove the fixing screw and raise the cover.
1 - For operation on 220-240V
three-pole H05RR-F type cable (3 x 2.5
2
mm ). This is the connection carried out
in the factory.
2 - For operation on 220-240V3
four-pole H05RR-F type cable (4 x 1.5
2
mm ).
3 - For operation on 380-415V2N
four-pole H05RR-F type cable (4 x 1.5
2
mm ).
The cable end to be connected to the
appliance must be provided with an ground
wire (yellow-green) at least 20 mm longer.
36
Instructions for the installer
∼
: use a
∼
: use a
∼
: use a