Sorting Nc Programs - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data

2.2 Sorting NC programs

Procedure
2.2 Sorting NC programs
You have the option to display the NC programs sorted individually. You can define the
criteria of the sort order via the user interface.
Criteria
● You can define up to three sort criteria.
● The criteria are selected via a drop-down list box. The drop-down lists include the column
● The priority of the sort order is from the upper, to the medium and the bottom criterion.
● You can select via an option field whether the sorting is to be executed in ascending or
12
1. The "DNC" window is opened.
The filter name and a filter symbol are displayed in the status display.
2. Press the softkey "Filter on/off", to activate or deactivate the selected
filter.
If, for example, the filter is deactivated, then a filter symbol with a slash
through it is displayed.
designations of the NC program list.
descending order.
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0