Table of Contents
Advertisement
3.1 Overview
Configuration Parameters
Set Up consists of configuring the following functions:
• Noise Suppression Frequency Selection – Selection of 50 Hz or 60 Hz.
Defaults to 60 Hz at unit reset.
• Output Configuration – The following Output Configuration functions can be
selected:
0 % Range
100 % Range
0 % Calibration
100 % Calibration
Table 3-1 provides steps and entry information for the complete configuration sequence.
1/03
3. Configuration
0 % Range values can be adjusted within a range of
–1600 mV to +1600 mV in 10 mV increments.
100 % Range values can be adjusted within a range of
–1600 mV to +1600 mV in 10 mV increments.
Output current can be typically adjusted to within a range
of 3.80 mA to 4.40 mA.
Output current can be typically adjusted to within a range
of 19.60 mA to 20.40 mA.
DirectLine® DL422 Sensor Module User Manual
Configuration
11
Advertisement
Table of Contents
