Troubleshooting - TRENDnet TE100-S8

Trendnet ethernet switch quick installation guide

Hide thumbs Also See for TE100-S8:

Troubleshooting

Q1:

After connecting the Switch to a power outlet, the LEDs do not turn on.

A1:

Check the connection of the external power adapter to the

power outlet. Also check that the power outlet is receiving power.

Q2:

When I connect a computer to the Switch's port, the LINK/ACT LED turns on,

but the 100Mbps LED remains off.

A2:

When the 100Mbps LED remains off, the computer's connection speed is

10Mbps.

Q3:

After I connect my PCs to the Switch, I am unable to share files.

A3:

First, check the LEDs on the Switch. Make sure the LINK/ACT LED is on.

Second, check the network cable. The minimum length of the cable is 1.5 meters

and the maximum length of the cable is 100 meters. Third, disable any software

firewall program. Fourth, verify that you have file sharing enabled. Please contact

your operating system support for more information.

Q4:

After I connect my PCs to the Switch, I can only get onto the Internet from one

computer.

A4:

The Switch was not designed to share Internet between multiple computers.

You need to get an Internet router, such as the TW100-S4W1CA.

If you still encounter problems or have any questions regarding the TE100-S8 please

contact Trendnet's Technical Support Department.

TE100-S8 and the

Table of Contents