Chapter 1: Setting Up; Connecting The Stereo - Sony LBT-N350 Operating Instructions Manual

Chapter 1:
Setting
Up

Connecting the Stereo

Inserting the Batteries
Setting the Clock
GB
4

Chapter 1: Setting Up

Connecting the Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see "Connecting
Optional Equipment" in Chapter 7.
STEP 1 Connecting the
Speakers
1 Twist the speaker cable coating and
strip it from the end of the cable.
2 Connect the right speaker to R
connectors and the left speaker to L
connectors.
See the manual supplied with the
speaker for details of the connections.
STEP 2 Connecting the
Aerial
FM lead aerial* (not
supplied in Germany)
AM loop aerial (supplied)
*Note: Extend it horizontally
To improve the FM reception
Connect an outdoor FM aerial to the FM
75Ω terminal, using a 75-ohm coaxial cable.
Important
Ground the external aerial from
against lightning with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
IEC standard socket
connector (not
supplied)
ground wire
To improve the AM reception
After you connect the AM aerial, connect a
6- to 15- meter (20- to 50- feet) insulated
wire to the AM terminal. Connect the
terminal to ground.
Important
Ground the external aerial from
against lightning with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
L
Insulated wires (not
supplied)
STEP 3 Connecting the
FM 75
Turntable (for the model
COAXIAL
supplied with the
turntable only)
Connect the supplied turntable PS-LX56P to
the PHONO IN jacks and the POWER
AM
SOURCE terminal.
terminal
screw
clamp
FM 75
COAXIAL
AM
terminal
screw
clamp
FM 75
COAXIAL
AM
ground wire