Oki ES9466 MFP Management Manual page 21

3.THE INITIAL VALUES
[Printer] Sub Menu
Item
General Setting
Restriction for Print Job
[Print Service] Sub Menu
Item
Raw TCP Print
Enable Raw TCP
LPD Print
Enable LPD
IPP Print
Enable SSL
FTP Print
Enable FTP Printing
[ODCA] Sub Menu
Item
Network
Enable Port
[Security] Menu
[Authentication] Sub Menu
Item
User Authentication Setting
User Authentication
User Authentication
According to Function
Use Password
Authentication for Print
Job
Enable Guest User
Authentication Type
PIN Code Authentication
Shared User Management
Initial value for the high
security mode
Only Hold
Initial value for the high
security mode
Disable
Disable
Enable
Disable
Initial value for the high
security mode
Disable
Initial value for the high
security mode
Enable
Disable
Disable
No check mark (Disable)
MFP Local Authentication
Disable
Disable
Remarks
Remarks
Remarks
Remarks
You cannot change the setting to "Disable".
Do not change the setting to "Enable".
Do not change the setting to "Enable".
The initial value is the same as in the Normal
Security Mode; however, it cannot be set to
"Enable".
Do not change the setting to "Enable".
Do not change the setting to "Enable".
Precautions on the Initial Values 21